CareerPlug candidate tracking works like this: every applicant lands in one dashboard, gets contacted the moment they apply, is prescreened and scored, moves through pipeline stages, and gets scheduled automatically, while the same data rolls up to the franchisor. A shared spreadsheet or a thread of group texts can’t do that, because follow-up depends on which manager happens to check. Speed is why it matters: across service franchises, applicants contacted within 24 hours were scheduled for interviews at 31.0%, versus 11.5% after four weeks or more, a 2.7x gap. That comes from our 2026 Franchise Hiring Report, which covers 46,000+ franchise locations and 7.5 million applicants.
Here’s how a candidate moves through our franchise hiring software, from application to hire, and what franchisors see along the way.
8 steps of CareerPlug candidate tracking, from application to hire
- Every applicant lands in one dashboard
- Candidates get contacted the moment they apply
- Every applicant is prescreened and scored
- Move candidates through the pipeline stages
- Interviews get scheduled automatically
- Text and message candidates without leaving the pipeline
- You evaluate and make the hire
- Franchisors see candidate activity across every location
Step 1: Every applicant lands in one dashboard
CareerPlug candidate tracking starts with the applicant dashboard, which puts every applicant for a location in one place, with each person’s status in your pipeline, so nobody hunts through inboxes or spreadsheets. (Everyone starts with a spreadsheet. It just stops scaling.) Applicants from your job postings and careers page land there automatically, so yes, CareerPlug tracks applicants automatically.
That matters because more than half of franchise hires now come from channels other than job boards, so most of your hiring runs through candidates you have to manage yourself. Job boards still deliver the largest single share. In the DIY version, applicants arrive in an inbox, follow-up lives in a group text, and a spreadsheet tracks the rest, so who gets called depends on which manager checks. In sales terms, every applicant is a lead, and a lead nobody calls back goes to a competitor.
William Bocast, a Culligan franchisee in Chico, California, used to hire from a stack of resumes and called it “rolling the dice.” He moved to a structured, pre-screened pipeline in CareerPlug. His verdict: “If you’re not using CareerPlug what the heck are you doing?” See how the platform fits together, and our 2025 Recruiting Metrics Report has by-industry benchmarks.
Step 2: Candidates get contacted the moment they apply
CareerPlug sends an auto-response the moment someone applies, and it notifies you when a high-quality candidate applies, so no good applicant sits unseen. It texts as well as emails: our Automated Interview Scheduling Guide reports an 8x higher response rate for text than email, and 84% of job seekers rate the text experience positively.
Speed protects your odds. Service franchises scheduled 31.0% of interviews when they contacted applicants within 24 hours, against 11.5% at four weeks or more. Our 24-48-5 rule sets the pace, and Clint’s How to Hire notes that some clients put a good applicant’s shelf life at about 48 hours.
| Milestone | Target |
|---|---|
| Contact the applicant | Within 24 hours |
| Interview | Within 48 hours |
| Hire | Within 5 days |
Treat candidates like customers. In Clint’s words, “You would never ignore a customer when they walk in the door. Remember that candidates are off the market fast and are often applying to many jobs at once, so you have to be ready to move.” Our guide to how you communicate with candidates shows the messages in action.
Step 3: Every applicant is prescreened and scored
Prescreen questions and scorecards, plus one-way phone screens, rank applicants automatically, so the right ones rise to the top of your list. Prescreen questions check the basics up front, and scorecards give every applicant the same score sheet, so each location judges candidates by one standard. That answers the question of whether you can prescreen and evaluate candidates inside CareerPlug: yes. BidClips pre-screened its applicants, and “the right applicants started showing up to interviews,” with review time cut. Our applicant screening software page shows the setup.
Step 4: Move candidates through the pipeline stages
CareerPlug candidate tracking sorts every applicant into one of five stages, and a manager moves them forward with one click while the whole team sees the same status.
| Stage | What it means |
|---|---|
| New | The applicant just applied |
| Reviewed | Prescreen answers and scores have been checked |
| Interview | The interview is scheduled or done |
| Offer | The offer is out |
| Hired | The candidate has accepted |
That is how you move an applicant through the hiring process in CareerPlug. Use the stages to hold yourself to 24-48-5: anyone sitting in New for more than a day is a lead going cold. Our hiring overview shows the stages in context.
Step 5: Interviews get scheduled automatically
Autopilot books interviews so you don’t have to. As our 2026 report puts it, “The candidate picks an available time, the interview goes on the calendar.” Per our Automated Interview Scheduling Guide, Autopilot scheduled 8x more interviews than baseline and cut scheduling time by up to 91%. Office Pride lifted phone-interview completion from 10-20% to 60-70% after automating follow-up, and one franchise owner there says, “I have saved over 10 hours per week thanks to CareerPlug!”
Step 6: Text and message candidates without leaving the pipeline
Two-way text recruiting lives inside the tracker, so every message stays on the candidate record, with no personal phones and no lost threads. Yes, you can text candidates from within CareerPlug, and the whole conversation stays with the candidate for the next manager. Texting fits how candidates already communicate, which is why the 8x response rate from step 2 matters. See our text recruiting software.
Step 7: You evaluate and make the hire
Automation moves and screens candidates, and a person makes the hire. Clint draws the line: “All of that can and should be automated. But evaluating whether someone should be hired? That isn’t something you want to hand off to an algorithm.” He adds, “Great hires don’t come solely from algorithmic pattern matching. They come from a real human having a conversation with another real human.” Use scores to decide who to talk to first, then have the conversation yourself, because only you know who will fit your team. Our evaluation tools help each interviewer score candidates the same way.
Step 8: Franchisors see candidate activity across every location
With CareerPlug candidate tracking, the same data rolls up to the franchisor in PartnerHub, so a franchisor can see how each location is hiring without micromanaging any of them. Franchisees keep their own accounts and make their own hiring decisions. So, can you track candidates across multiple locations in CareerPlug? Yes: each location tracks its own applicants, and franchisors get the network view. The DIY approach of spreadsheets and inboxes leaves the franchisor in the dark. Visibility means that a franchisor can see a location where applicants wait for days to receive a first response, and coach that franchisee on the 24-hour rule, while the franchisee still gets to decide who to hire.
Our franchise benchmarks are based on 46,000+ locations and 7.5 million applicants resulting in nearly 90,000 hires. The Goddard School saw 70% more applicants and 100% better candidate quality at 50% lower recruitment cost. See our guide to the best ATS for franchises and our franchisors page.
P.S. Running a franchise system? The Franchise People Playbook shows franchisors how to make hiring a competitive advantage across every location.
Common questions about CareerPlug candidate tracking
Is CareerPlug a good applicant tracking system for franchises?
Yes. CareerPlug candidate tracking is built for franchise hiring: franchisees track candidates on their own accounts, and franchisors see activity across every location through PartnerHub. More than 400 franchise brands use it.
Can you track candidates across multiple locations in CareerPlug?
Yes. Each location tracks its own applicants, and franchisors see candidate activity across every location in PartnerHub.
What does CareerPlug’s applicant dashboard show you?
The applicant dashboard shows every applicant for a location in one place, with each person’s status in your pipeline, so you can see who applied and who is moving forward.
Does CareerPlug track applicants automatically?
Yes. Applicants land in one dashboard and get an auto-response the moment they apply, then move through pipeline stages as managers advance them.
How does CareerPlug notify you when a high-quality candidate applies?
CareerPlug sends the applicant an auto-response and notifies you when a high-quality candidate applies, so you can reach that person while they’re still looking.
What are the stages of the CareerPlug hiring pipeline?
The pipeline runs from new to reviewed, interview, offer, and hired, and a manager moves each applicant forward with one click.
Can you text candidates from within CareerPlug?
Yes. Two-way text recruiting runs inside the candidate record, so every message stays in one place.
Wrapping up: speed for candidates, visibility for franchisors
CareerPlug candidate tracking works as one system across these eight steps: speed on the candidate side and visibility on the franchisor side. The DIY method costs more than it saves, and as Clint says, “Staying stuck is almost always more expensive than moving forward.” So, is CareerPlug a good applicant tracking system for franchises? It was built for them.